Flash

Meshtastic has a polished web flasher — this is the easy path.

Web flasher

1. Plug your board in over USB.
2. Open https://flasher.meshtastic.org in Chrome or Edge (it needs Web Serial / Web USB).
3. Select your device and the current stable firmware, then flash. Keep the cable in until it finishes.
4. Reboot when prompted.

nRF boards (Seeed T1000-E, Elecrow ThinkNode M1) may need their bootloader — double-tap reset — before the flasher can see them.

Next → Config & joining.

Flasher verified 2026-06-16 against flasher.meshtastic.org / meshtastic.org. Take the current stable build.

Reminder: Meshtastic is supported but runs no camp services, and does not bridge to Meshcore or Reticulum.